1.115V/60Hz,1HP powerful heavy duty copper wire motor,max capacity of flow rate 3435GPH. Max depth for pump working under water is 23FT. Max particle size is 1 INCH. Max water temperature is 35? and max ambient temperature is 40?. Build-in overload thermal protector with automatic reset which means this pump can rework after cooling down for a while.
2.Our pump has a float switch which means pump can switch on or off automatically. When water level reach more than approximate 21.65 inch from bottom in water,the pump will start to work automatically and when water level goes down below approximate 9.45inch,the pump will switch off. If you want to continue pumping water,you can hold up float. Once water level down below the hole of pump bottom and cannot pump water out any more,you should put float switch down or pull out the plug,otherwise pump motor will burn out. The minimum water level what this pump can leave is 1.56 inch.
3.Please note that this pump is not suitable for 24hours continuous running such as powering garden water features or fountains as other sellers may imply. For the first time use,you should submerge pump inclined downward in water to discharge air completely.
4.The pump is widely usefor flooded area,swimming pool,garden pond and so on. Able to drain infiltrating water,cesspools or reservoirs,decanting water and clean,dirty or muddy swimming pools. It is a necessity for a house and you will never worry the basement flood again.
Stainless Steel Housing
Max Flow Rate: 3435GPH
Max Supply Height: 24FT
Max Submersible Depth: 23FT
Max Particle Size: 1 INCH
Power Cord Length: 25FT
1x submersible pump
1x outlet connector
1x user manual
Submersible pump for clean/dirty water with UL Plug and copper wire motor
Voltage: 115V-60Hz ;Power: 1HP
Max Flow Rate: 3435GPH;Max Delivery Height: 24FT ;Cord Length: 25FT
Build-in overload thermal protector with automatic reset. Each pump has a float switch
Discharge Fittings: 1" & 1-1/4" & 1-1/2". Not designed for continuous running.